7Byte Computers  
Home Support ...

Hot CPU Tester Pro 4 Help
Diagnostic
Burn-in
Benchmark
SysInfo
Options
Test Modules
Complex Matrix
Calculating Pi
Sorting Algorithms
Prime Test
Fast Fourier Transforms
Chipset
L1 Cache
L2 Cache
Memory
Hard Disk
MMX
SSE
SSE2
3DNow!
LiveSupprt
Debug
LiveSupport

Diagnostic
Diagnostic
Diagnostic tab is the main window of Hot CPU Tester. Diagnostic modules can be ran or stopped from here. It also displays information on test modules status.
  1. Module: Displays module name.
  2. Progress: Displays progress of one cycle(iteration) of the module
  3. Run: Number of cycles(iterations) the module has successfully passed.
  4. Status: Console box for the module. All info & error messages regarding the module is shown here.
  5. Run Test/Stop Test: Start/Stop button for diagnostic test.
  6. Elapsed Time: Displays how much time is passed since the test started.
  7. Test Started At: Displays start time of the test.
  8. Will Finish At: Displays the time test will finish.
  9. CPU Performance Ratio: Displays performance ratio of the CPU percentage. CPU Performance ratio is calculated by the following algorithm:
    1. CPU speed in MHz while idle => base_speed
    2. CPU speed in MHz while test is running=> current_speed
    3. (current_speed/base_speed)*100 => cpu_performance(in %)
  10. Show Log: Displays/Hides the log window.